#include <j1939_struct.h>
Collaboration diagram for j1939_erc1_typ:
Public Attributes | |
| timestamp_t | timestamp |
| int | trq_mode |
| int | enable_brake_assist |
| int | enable_shift_assist |
| double | actual_ret_pcnt_trq |
| double | intended_ret_pcnt_trq |
| int | rq_brake_light |
| int | src_address_ctrl |
| int | drvrs_demand_prcnt_trq |
| double | selection_nonengine |
| int | max_available_prcnt_trq |
Detailed Description
PDU ERC1 (Electronic Retarder Controller #1) doc. in J1939 - 71, p150
Member Data Documentation
◆ actual_ret_pcnt_trq
| double j1939_erc1_typ::actual_ret_pcnt_trq |
Actual Retarder - Percent Torque (-125% to 125%)
◆ drvrs_demand_prcnt_trq
| int j1939_erc1_typ::drvrs_demand_prcnt_trq |
Drivers Demand Retarder - Percent Torque (-125% to 125%)
◆ enable_brake_assist
| int j1939_erc1_typ::enable_brake_assist |
Retarder Enable - Brake Assist Switch (0-3)
◆ enable_shift_assist
| int j1939_erc1_typ::enable_shift_assist |
Retarder Enable - Shift Assist Switch (0-3)
◆ intended_ret_pcnt_trq
| double j1939_erc1_typ::intended_ret_pcnt_trq |
Intended Retarder - Percent Torque (-125% to 125%)
◆ max_available_prcnt_trq
| int j1939_erc1_typ::max_available_prcnt_trq |
Actual Maximum Available Retarder - Percent Torque (-125% to 125%)
◆ rq_brake_light
| int j1939_erc1_typ::rq_brake_light |
Retarder Requesting Brake Light (0-3)
◆ selection_nonengine
| double j1939_erc1_typ::selection_nonengine |
Retarder Selection, non-engine (0-100%)
◆ src_address_ctrl
| int j1939_erc1_typ::src_address_ctrl |
Source Address of Controlling Device for Retarder Control (0-255)
◆ timestamp
| timestamp_t j1939_erc1_typ::timestamp |
time the message was received
◆ trq_mode
| int j1939_erc1_typ::trq_mode |
Retarder Torque Mode (0-15)
The documentation for this struct was generated from the following file:
- include/jbus/j1939_struct.h
