#include <j1939_struct.h>
Collaboration diagram for j1939_eec2_typ:
Public Attributes | |
| timestamp_t | timestamp |
| int | accel_pedal1_idle |
| int | accel_pedal_kickdown |
| int | spd_limit_status |
| int | accel_pedal2_idle |
| double | accel_pedal1_pos |
| double | eng_prcnt_load_curr_spd |
| double | accel_pedal2_pos |
| double | act_max_avail_eng_trq |
Detailed Description
PDU EEC2 (Electronic Engine Controller #2) doc. in J1939 - 71, p152
Member Data Documentation
◆ accel_pedal1_idle
| int j1939_eec2_typ::accel_pedal1_idle |
Accelerator Pedal 1 Low Idle Switch (0-3)
◆ accel_pedal1_pos
| double j1939_eec2_typ::accel_pedal1_pos |
Accelerator Pedal Position 1 (0-100%)
◆ accel_pedal2_idle
| int j1939_eec2_typ::accel_pedal2_idle |
Accelerator Pedal 2 Low Idle Switch (0-3)
◆ accel_pedal2_pos
| double j1939_eec2_typ::accel_pedal2_pos |
Accelerator Pedal Position 2 (0-100%)
◆ accel_pedal_kickdown
| int j1939_eec2_typ::accel_pedal_kickdown |
Accelerator Pedal Kickdown Switch (0-3)
◆ act_max_avail_eng_trq
| double j1939_eec2_typ::act_max_avail_eng_trq |
Actual Maximum Available Engine - Percent Torque (0-100%)
◆ eng_prcnt_load_curr_spd
| double j1939_eec2_typ::eng_prcnt_load_curr_spd |
Engine Percent Load At Current Speed (0-250%)
◆ spd_limit_status
| int j1939_eec2_typ::spd_limit_status |
Road Speed Limit Status (0-3)
◆ timestamp
| timestamp_t j1939_eec2_typ::timestamp |
time the message was received
The documentation for this struct was generated from the following file:
- include/jbus/j1939_struct.h
