#include <j1939_struct.h>
Public Attributes | |
| timestamp_t | timestamp |
| int | asr_engine_ctrl_active |
| int | asr_brk_ctrl_active |
| int | antilock_brk_active |
| int | ebs_brk_switch |
| double | brk_pedal_pos |
| int | abs_offroad_switch |
| int | asr_offroad_switch |
| int | asr_hillholder_switch |
| int | trac_ctrl_override_switch |
| int | accel_interlock_switch |
| int | eng_derate_switch |
| int | aux_eng_shutdown_switch |
| int | accel_enable_switch |
| double | eng_retarder_selection |
| int | abs_fully_operational |
| int | ebs_red_warning |
| int | abs_ebs_amber_warning |
| int | src_address_ctrl |
| double | total_brk_demand |
Detailed Description
PDU EBC1 (Electronic Brake Controller #1) doc. in J1939 - 71, p151
Member Data Documentation
◆ abs_ebs_amber_warning
| int j1939_ebc1_typ::abs_ebs_amber_warning |
ABS/EBS Amber Warning Signal (Powered Vehicle) (0-3)
◆ abs_fully_operational
| int j1939_ebc1_typ::abs_fully_operational |
ABS Fully Operational (0-3)
◆ abs_offroad_switch
| int j1939_ebc1_typ::abs_offroad_switch |
ABS Off-road Switch (0-3)
◆ accel_enable_switch
| int j1939_ebc1_typ::accel_enable_switch |
Remote Accelerator Enable Switch (0-3)
◆ accel_interlock_switch
| int j1939_ebc1_typ::accel_interlock_switch |
Accelerator Interlock Switch (0-3)
◆ antilock_brk_active
| int j1939_ebc1_typ::antilock_brk_active |
Anti-Lock Braking (ABS) Active (0-3)
◆ asr_brk_ctrl_active
| int j1939_ebc1_typ::asr_brk_ctrl_active |
ASR Brake Control Active (0-3)
◆ asr_engine_ctrl_active
| int j1939_ebc1_typ::asr_engine_ctrl_active |
ASR Engine Control Active (0-3)
◆ asr_hillholder_switch
| int j1939_ebc1_typ::asr_hillholder_switch |
ASR "Hill Holder" Switch (0-3)
◆ asr_offroad_switch
| int j1939_ebc1_typ::asr_offroad_switch |
ASR Off-road Switch (0-3)
◆ aux_eng_shutdown_switch
| int j1939_ebc1_typ::aux_eng_shutdown_switch |
Engine Auxiliary Shutdown Switch (0-3)
◆ brk_pedal_pos
| double j1939_ebc1_typ::brk_pedal_pos |
Brake Pedal Position (0-100%)
◆ ebs_brk_switch
| int j1939_ebc1_typ::ebs_brk_switch |
EBS Brake Switch (0-3)
◆ ebs_red_warning
| int j1939_ebc1_typ::ebs_red_warning |
EBS Red Warning Signal (0-3)
◆ eng_derate_switch
| int j1939_ebc1_typ::eng_derate_switch |
Engine Derate Switch (0-3)
◆ eng_retarder_selection
| double j1939_ebc1_typ::eng_retarder_selection |
Engine Retarder Selection (0-100%)
◆ src_address_ctrl
| int j1939_ebc1_typ::src_address_ctrl |
Source Address of Controlling Device for Brake Control (0-255)
◆ timestamp
| timestamp_t j1939_ebc1_typ::timestamp |
time the message was received
◆ total_brk_demand
| double j1939_ebc1_typ::total_brk_demand |
Total brake demand
◆ trac_ctrl_override_switch
| int j1939_ebc1_typ::trac_ctrl_override_switch |
Traction Control Override Switch (0-3)
The documentation for this struct was generated from the following file:
- include/jbus/j1939_struct.h
